Stöbern Sie durch unsere Angebote (463 Treffer)

PC104 40L-3 - PC104 BUS Federleiste 40-pol, Löt...
3,60 € *
zzgl. 5,95 € Versand

Federleiste, 40-pol, 2-reihig Standard für steckbare PC-kompatible Module Ausführung: Löttechnik LxBxH: 51,9 x 5,0 x 11,5 mm Rastermaß: 2,54 mm Stiftlänge: 3,4 mm Isolierkörper: PBT, UL 94V-0 Kontakte: Au auf Kupferlegierung Güte: II PBT-Isolierkörper

Anbieter: reichelt elektronik
Stand: 05.09.2019
Zum Angebot
AT 90USB162 TQ - Bus-Controller, Flash, TQFP-32
2,55 € *
zzgl. 5,95 € Versand

AT90USB162 • High Performance, Low Power AVR 8-Bit Mikrocontroller • Advanced RISC-Architektur - 125 Instruktionen - Ausführung meist in einem einzigen Taktzyklus - 32 x 8 General Purpose Register Working - 16 MIPS Durchsatz bei 16 MHz • Nichtflüchtiger Programm-und Datenspeicher - 16K Bytes des ISP-Flash-Speicher • USB 2.0 Full-Speed-Device Module mit Interrupt - Universal Serial Bus Spezifikation Rev. 2.0 • Periphere Funktionen - PS / 2 kompatibler Pad - 1x8-Bit Timer / Zähler mit separatem Prescaler (2x8-Bit-PWM-Kanäle) - 1x16-Bit Timer / Zähler mit Separatem Prescaler, vergleichen und Capture Mode (3x8-Bit-PWM-Kanäle) - USART mit SPI-Master Modus + Hardware-Flusssteuerung (RTS / CTS) - Master / Slave SPI serielle Schnittstelle - Programmierbarer Watchdog-Timer mit Separate On-Chip-Oszillator - On-Chip Analog Komparator - Alarm-und Wake-on-PIN • On-Chip-Debug-Schnittstelle (debugWIRE) • Spezielle Merkmale - Power-On Reset + programmierbare Brown-out-Erkennung - Interner kalibrierter Oscillator - Externe + interne Interrupt-Quellen - Fünf Schlaf-Modi: Standby, Power-Save-, Power-Down, Standby, + Extended Standby • 22 programmierbare I / O-Reihen • Betriebsspannungen - 2,7 - 5,5 V • Betriebstemperatur - Industrie-(-40 ° C bis +85 ° C) • Maximale Frequenz - 8 MHz bei 2,7 V - 16 MHz bei 4,5 V

Anbieter: reichelt elektronik
Stand: 19.09.2019
Zum Angebot
TUSB 2036 - Bus-Controller, USB-Hub, LQFP-32
1,46 € *
zzgl. 5,95 € Versand

USB 2/3-HUB 3,3 V Gehäuse: LQFP-32

Anbieter: reichelt elektronik
Stand: 05.09.2019
Zum Angebot
SJA 1000 T - Bus-Controller, Stand-alone, SO-28
3,35 € *
zzgl. 5,95 € Versand

PellCAN 2.0B 1Mbit/s 24 MHz SO-28

Anbieter: reichelt elektronik
Stand: 05.09.2019
Zum Angebot
AT 90CAN128 - Bus-Controller, Flash, TQFP-64
5,45 € *
zzgl. 5,95 € Versand

High-performance, Low-power AVR® 8-bit Microcontroller Gehäuse: TQFP-64

Anbieter: reichelt elektronik
Stand: 05.09.2019
Zum Angebot
FT 245 RL - Bus-Controller, USB-FIFO, SSOP-28
4,40 € *
zzgl. 5,95 € Versand

Gehäuse: SSOP-28 Hersteller: FTDI

Anbieter: reichelt elektronik
Stand: 20.09.2019
Zum Angebot
UCS1003-2-BP - Bus-Controller, USB-Ladeport, QF...
1,45 € *
zzgl. 5,95 € Versand

The UCS1003 provides a USB port power switch for precise control of up to 2.7 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, back-voltage protection and charge active signal*. Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like notebook PCs, the ability to detect attachments from a sleep or off state. After the Attach Detect is flagged, the system can decide to wake up and/or provide charging. In addition to power switching and current limiting modes, the UCS1003 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple, Samsung, and RIM, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile** is available to accommodate unique existing and future portable device handshaking/signature requirements. The UCS1003 also provides current monitoring** to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power in a standby and/or off state but do not want to drain the battery excessively. The UCS1003 is available in a 20-pin QFN 4 mm x 4 mm package. *UCS1003-2 only ** UCS1003-1 only • 2.9 ... 5.5V Source Voltage Range • Overcurrent Trip or Constant Current Limiting • Ultra-Low Power Sleep State • Temperature Range: -40 ... +85°C Technical Data: • Supply Voltage: 4,5 ... 5,5 V • Supply Current: 650 ... 750 µA • Leakage Current: ±5 µA • Data Switch Current: ± 50 mA

Anbieter: reichelt elektronik
Stand: 12.09.2019
Zum Angebot
UCS1003-1-BP - Bus-Controller, USB-Ladeport, QF...
1,70 € *
zzgl. 5,95 € Versand

The UCS1003 provides a USB port power switch for precise control of up to 2.7 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, back-voltage protection and charge active signal*. Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like notebook PCs, the ability to detect attachments from a sleep or off state. After the Attach Detect is flagged, the system can decide to wake up and/or provide charging. In addition to power switching and current limiting modes, the UCS1003 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple, Samsung, and RIM, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile** is available to accommodate unique existing and future portable device handshaking/signature requirements. The UCS1003 also provides current monitoring** to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power in a standby and/or off state but do not want to drain the battery excessively. The UCS1003 is available in a 20-pin QFN 4 mm x 4 mm package. *UCS1003-2 only ** UCS1003-1 only • 2.9 ... 5.5V Source Voltage Range • Overcurrent Trip or Constant Current Limiting • Ultra-Low Power Sleep State • Temperature Range: -40 ... +85°C Technical Data: • Supply Voltage: 4,5 ... 5,5 V • Supply Current: 650 ... 750 µA • Leakage Current: ±5 µA • Data Switch Current: ± 50 mA

Anbieter: reichelt elektronik
Stand: 12.09.2019
Zum Angebot
UCS1003-3-BP - Bus-Controller, USB-Ladeport, QF...
1,45 € *
zzgl. 5,95 € Versand

The UCS1003 provides a USB port power switch for precise control of up to 2.7 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, back-voltage protection and charge active signal*. Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like notebook PCs, the ability to detect attachments from a sleep or off state. After the Attach Detect is flagged, the system can decide to wake up and/or provide charging. In addition to power switching and current limiting modes, the UCS1003 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple, Samsung, and RIM, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile** is available to accommodate unique existing and future portable device handshaking/signature requirements. The UCS1003 also provides current monitoring** to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power in a standby and/or off state but do not want to drain the battery excessively. The UCS1003 is available in a 20-pin QFN 4 mm x 4 mm package. *UCS1003-2 only ** UCS1003-1 only • 2.9 ... 5.5V Source Voltage Range • Overcurrent Trip or Constant Current Limiting • Ultra-Low Power Sleep State • Temperature Range: -40 ... +85°C Technical Data: • Supply Voltage: 4,5 ... 5,5 V • Supply Current: 650 ... 750 µA • Leakage Current: ±5 µA • Data Switch Current: ± 50 mA

Anbieter: reichelt elektronik
Stand: 12.09.2019
Zum Angebot